Setting-up DIY Arcade

How do I install the Amplifier?
It depends on which kit you purchased, you may have gotten an AMP and speakers. Amp Connections:  The power cable for the Amp could either be a blac...
Fri, 10 Oct, 2014 at 2:58 PM
How do I set the JAMMA board to Freeplay?
You can use the System DIPSW Set up. Use the joystick to move the cursor or S1 buttons to switch on/off.  To set up Freeplay, you can check the JAMMA A...
Fri, 10 Oct, 2014 at 3:03 PM
I just bought a kit. Do I need an 8-way joystick or will 4-way suffice?
The Standard Joystick Zippy we sell has a back plate when moved will supports 2-way 4-way and 8-way. With the 60-in-1 there are 4-way and 8-way games. Take ...
Fri, 10 Oct, 2014 at 3:04 PM
How do I connect the 5th and 6th button on the 2019-in-1 board?
On the 2019-in-1 board, the 5th and 6th player buttons aren't ran from the JAMMA Harness. There is another cable which plugs into the top of the JAMMA ...
Fri, 10 Oct, 2014 at 3:14 PM
How to connect up a JAMMA board to the JAMMA harness?
1. Place the JAMMA Harness so (GND) pin 1, 2 and (+5v) Pin 3, 4 are shown like in the photo below. 2. Place the JAMMA board so the gap i...
Fri, 10 Oct, 2014 at 3:19 PM
What do I need to power the 2019-in-1 JAMMA board?
You'll need a ATX power supply to power the 2019 JAMMA board, You'll also need 12v and 5v source to power the buttons and joysticks. For this you ...
Tue, 24 Mar, 2015 at 9:54 PM
What best resolution does the 60-in-1 support for VGA monitor?
The 60-in-1 board outputs a resolution of 640x480.
Tue, 18 Nov, 2014 at 12:54 PM